Dupler Stamp Mill






				Dupler Stamp Mill ( 1:48 ) ( Mockup only )


	Prototype photos kindly supplied by Kris Blackmarr, Colorado, USA


	These photos by Kris are typical of the detail, colouring and cladding that will be adopted for the Stamp Mill exterior.

Now for some work in progress photos of the Stamp Mill.

Bracing the roof area, before adding the dormers & roof cladding.

Cutting in the openings

Saratoga Mill 1:87 left hand side

( built by Steve Pettit )




				the cladding is placed in postiton, then mark window openings



			Sheets are glued together and openings cut


				Modeling is a very healthy past time





			Windows in place. Stairs have been started and fixed at a later stage. That’s it for now. December 26th 2009


	March 28th 2010




		I recently pickup 60 sheets of O scale roofing iron and laid them out on a large board. With some “el cheapo” grey primer, I give them a light spray over. Final colour finish will be decided at a later stage. I use yellow glue to fix sheets to the cardstock.